WEBWIRE – Monday, March 9, 2026
Circularity Capital portfolio company Shark Solutions has launched a new set of paint formulations that enable manufacturers to significantly reduce the carbon footprint of interior wall and ceiling paints, without compromising performance.
The new Starting Point Formulations (SPFs) are designed for high‑performance architectural paints and use Shark Solutions proprietary SharkDispersion binders, which are produced entirely from recycled post‑consumer laminated glass. These binders replace traditional oil‑based acrylics that are widely used across the global paints and coatings industry.
While the underlying chemistry is complex, the commercial implication is straightforward: paint producers can now formulate everyday interior paints that are more sustainable, competitively priced and aligned with tightening environmental standards, without requiring major changes to their production processes or end‑product quality.
The new formulations can reduce the climate impact associated with paint binders by three to five times compared with conventional materials, translating into a carbon footprint reduction of up to 69% versus styrene acrylics and up to 81% versus traditional acrylic binders.
Importantly for manufacturers and retailers, the paints deliver strong performance where it matters most to consumers. The formulations achieve high opacity and durability, including strong resistance to wear from cleaning, even at higher pigment levels that typically make paints harder to formulate effectively.
The binders are also free from biocides, contain virtually no volatile organic compounds (VOCs), and are produced in Europe from a waste stream that would otherwise be down‑cycled or landfilled. This supports paint producers seeking to meet regulatory, retailer and consumer expectations around healthier indoor environments and circular sourcing.
For Circularity Capital, the development highlights Shark Solutions ability to turn a difficult‑to‑recycle material laminated glass from end‑of‑life vehicles and buildings into a scalable industrial input with clear environmental and commercial value. Paints and coatings represent one of the largest and most established end markets for polymer binders, offering a significant route to scale for recycled materials.
The new formulations further strengthen Shark Solutions position as a supplier of drop‑in circular materials that help industrial customers decarbonise without increasing costs or sacrificing performance a core theme across Circularity Capitals portfolio. Find out more here.
( Press Release Image: https://photos.webwire.com/prmedia/7/351719/351719-1.png )
WebWireID351719
This news content was configured by WebWire editorial staff. Linking is permitted.
News Release Distribution and Press Release Distribution Services Provided by WebWire.
Shark Solutions strengthens Position as Drop‑in Supplier for Global Paint Markets
What is a Drop‑in Supplier and Why it Matters in the Paint Industry
In the dynamic paint industry, a drop‑in supplier is a company whose products can be integrated directly into existing paint formulations without requiring changes in production processes or reformulations. This seamless integration saves time and costs, making drop‑in solutions highly sought-after by paint manufacturers looking to innovate quickly or improve product performance.
Shark Solutions has emerged as a leader in this space, providing cutting-edge materials and additives that easily replace customary ingredients. Their ability to offer reliable drop-in components fuels efficiency across global paint markets, from industrial coatings to decorative applications.
Key Products and Innovations by Shark Solutions
Shark Solutions offers a wide array of advanced raw materials specifically tailored to meet stringent performance and environmental standards in the paint sector. Here’s a snapshot of their core product categories:
| Product Category | Submission | Features | Benefits |
|---|---|---|---|
| Advanced Resin Dispersions | Waterborne and solventborne paints | Improves film formation and durability | Enhanced weather resistance, smoother finishes |
| Eco-Amiable Paint Additives | All paint types prioritizing sustainability | non-toxic, low VOC emissions | Meets regulatory compliance, safer for users |
| Anti-Corrosion Agents | Industrial and marine coatings | Long-lasting substrate protection | Prevents rust, extends coating lifespan |
| Rheology Modifiers | Decorative and specialty paints | Controls viscosity and leveling | Improved application and appearance |
Benefits of Partnering wiht Shark solutions as a Drop‑in Supplier
Choosing Shark Solutions as a drop‑in supplier yields numerous advantages for paint manufacturers, including:
- Cost Efficiency: Eliminates costly reformulations or production retooling.
- Speed to Market: Fast product development cycles with ready-to-use materials.
- Consistent Quality: Reliable, high-purity raw materials ensuring uniform paint performance.
- Sustainability: Products engineered to lower environmental impact, including low VOC and renewable content.
- Technical Support: Expert guidance on material integration and troubleshooting.
- Global Reach: Scalable supply chain ensuring availability in key paint markets worldwide.
Case Studies: Shark Solutions Drives Success Across Global Paint Markets
Case study 1: Enhancing Industrial Coatings in EMEA
A leading industrial paint producer in Europe leveraged Shark Solutions’ anti-corrosion agents as drop-in replacements to enhance product durability.The client reported a 20% increase in coating lifespan and a significant reduction in rust-related warranty claims within the first year.
Case Study 2: Sustainable Decorative Paints in APAC
In Asia-Pacific,Shark Solutions partnered with a top decorative paint manufacturer to introduce eco-friendly additives that reduced VOC content by 35% without compromising finish quality.This helped the client meet tightening regional environmental regulations and improve customer satisfaction.
Case Study 3: Fast Product Launch in North America
A paint company needed a fast reformulation to address new industry standards for indoor air quality. Shark Solutions provided ready drop-in resins and modifiers, enabling the company to launch a compliant product line within six weeks, beating competitors to market.
Practical Tips When Incorporating Shark Solutions Products
- Perform Small-Scale Trials: Always test Shark Solutions’ materials in your paint system at bench scale to fine-tune compatibility and performance.
- Consult Technical Team: Engage Shark Solutions’ experts early for formulation advice and problem-solving strategies.
- Monitor Regulatory Compliance: Use Shark Solutions’ additives to meet evolving environmental standards like VOC limits and REACH.
- Optimize Storage Conditions: Follow recommended storage guidelines to maintain product integrity and prevent degradation.
- Document Changes: Keep detailed records of drop-in implementations to track benefits and ensure repeatability.
Frequently Asked Questions (FAQs)
| Question | Answer |
|---|---|
| What makes Shark Solutions a preferred drop-in supplier? | Its ability to offer high-performance, sustainable products that integrate seamlessly into existing paint formulations. |
| Are Shark Solutions products compatible with all paint types? | They are designed for broad compatibility but require formulation testing for specific paint systems. |
| Can these solutions help with regulatory compliance? | Yes, many products reduce VOCs and meet environmental regulations globally. |
| How is product support handled? | Shark Solutions provides technical support and consultation to ensure smooth product integration. |
| Is Shark Solutions active in emerging markets? | Yes, growing presence in Asia, Latin America, and Africa with tailored local solutions. |
Industry Trends Supported by Shark Solutions
Shark Solutions remains at the forefront of paint market innovation by aligning their drop-in products with these key industry trends:
- Green Chemistry: Offering bio-based and low-emission additives to reduce environmental footprint.
- Smart Coatings: Development of functional coatings with self-cleaning,anti-microbial,or UV-resistant features.
- Waterborne Technologies: Supporting the shift from solventborne to waterborne paints through compatible additives.
- Customization: Providing flexible raw materials enabling tailored formulations for niche market demands.
Upcoming Innovations
shark Solutions is actively investing in R&D to launch next-gen drop-in products that integrate nanotechnology and advanced polymer science,aimed to provide superior durability and environmental benefits.
“Shark Solutions’ commitment to innovation and sustainability makes them a trusted partner for paint manufacturers worldwide. their drop-in materials simplify formulation complexity, accelerate development, and drive competitive advantage.” – Industry Expert
